Decorative vintage pink floral wallpaper application Jun 11,2021

How to choose high-quality floral wallpaper?

♡ Choose your wall height and overall width

♡The width of each panel is 24 inches; the number of panels received depends on the width you choose

♡ The design is printed on all panels to create a large seamless mural

♡Made of 100% polyester fabric with adhesive backing

♡Free of formaldehyde, phthalates and PVC

♡Instructions for use and spatula are included


How to use?

Tools needed:

• Tape measure

• Spirit level and pencil

• Straight edge or ruler

• Utility knife or blade

• Scraper – (Provided)


♡Step 1: Prepare your walls

Use only warm water and a soft cloth to clean the wall surface. Make sure that there are no residues on the surface. The wallpaper may not stick to dirty/textured surfaces. (Newly painted wall?-Please wait about 30 days before putting the wallpaper)


♡Step 2: Arrange the panels in order

If a mural is installed, the panel is numbered at the bottom of the back. Before starting the installation process, place the panel on the floor.


♡Step 3: Start hanging

Use the numbers on the bottom back of the panel to hang them in order to ensure that the design repeats smoothly throughout the wall. For wallpaper designs, hang them from left to right to ensure that the design repeats smoothly on the wall. Start at the upper left corner of the wall.


Place the first strip and peel off the paper backing a few inches at a time from the top of the roll. Slowly support the roll while walking + peel off the back of the mural. Align the top of the artwork with the ceiling and make sure it is straight on the wall.

If you need to adjust the position, slowly peel the paper off the wall and reapply as needed.


Once the top of the strip is in place, gently peel the paper from a one-foot angle, then smooth the paper to the wall, moving outward from the center. If necessary, use a squeegee to wipe air bubbles to the edges of the design, taking care not to damage your artwork.


Pick up your second strap and apply it so that the left side is aligned with the right side of the previous one to match the design. Repeat this step, moving from left to right and align each new strip with the strip to its left.


♡Step 4: Finish

Once you have applied all the panels, trim the excess paper on the edge of the wall with a razor blade.



Our floral wallpaper has a high-tack removable adhesive. We recommend using wallpaper primer and permanent double-sided tape on the top edge to ensure safety. If you are not sure about texture or paint compatibility, use wallpaper primer and double-sided tape on top of the panel.

Leave a message
Leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact